![]() ![]() Hold down the knob button on the Ender 3 while turning on the printer.To enter the bootloader mode on the Ender 3, you’ll need to follow these steps: To install Jyers, you must enter the bootloader mode on the Ender 3. Once the card is inserted, you’re ready to enter bootloader mode. It is best to consult the manual for your specific printer model to locate the MicroSD card slot. Some printers may have the MicroSD card slot accessible from the front, while others may have it located on the side or the back of the printer. It is typically located near the mainboard, but the exact location can depend on the design of the printer. The location of the MicroSD card slot may vary between the different models of Ender 3, including the Ender 3 V2, S1, and Pro. Make sure that the printer is powered off before inserting the card. With the Jyers files copied to the MicroSD card, you can insert the card into the Ender 3. Make sure that the file is named “Jyers.bin” and that it is the only file in the root folder of the card. In the format options, select “FAT32” as the file system and click “Start”. To format the MicroSD card, insert it into your computer, right-click on the card in the file explorer, and select “Format”. You will need a MicroSD card that is at least 4GB in size, and it should be formatted in FAT32 format. Next, insert the MicroSD card into your computer and copy the Jyers.bin file to the root folder of the card. Once you have downloaded save it to a preferred location on your computer. ![]() Just click the file and it should download automatically. For example, if your printer has a 4.2.7, then download the file “E3V2-Default-v4.2.7-v2.0.1.bin”. ĭownload the version that corresponds to your motherboard, as checked in the previous section. You can download Jyers from the official website. The next step in installing Jyers is to download the software. This will ensure that the printer is functioning correctly and that Jyers will be able to communicate with the printer.Ĭheck out the video below to see detailed information about how to check if your Marlin firmware is up-to-date. If your firmware is out of date, you can download the latest version from the Marlin website and follow the instructions for installing the firmware on your 3D printer. You can then compare the version number of your Marlin firmware to the latest version number that is available on the Marlin website. The version of the Marlin firmware that is installed on your printer will usually be displayed in the control software’s settings or “About” section. The easiest way to check if your Marlin firmware is up-to-date is to connect your 3D printer to your computer and open the control software that you use to control the printer. It is also important to ensure that your Ender 3 is properly set up and that the Marlin firmware is up-to-date.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |